ACCELERATOR

Category:

Description

Two Coat Floor Finish
A true 30% n.v. solids coating, applied at twice the rate of
standard floor polish is a quick way to protect a floor.
Two coats yields the durability of five coats of 20% solids
floor polish. If more gloss is desired, let the first two coats
to harden overnight, then apply a third coat.
This self-sealing formula resists detergents, powdering,
yellowing, scuffing and black marks. Recommended as a
topcoat on decorative concrete jobs to create gloss
uniformity. Dry times vary between 30 minutes and one
hour with air movement. This strong coating does not swirl
when burnished. For schools, offices, restaurants, retail
locations, hospitals, nursing homes.
Special situations:
Re: NEW terrazzo: cementious floors should season a few
months before coating. The first two coats applied over
virgin terrazzo should be alkaline-resistant, such as
GROUNDWORKS.
Re: NEW VCT: strip factory applied coating before
application.

Scrub and Recoat of Existing Finish
Older coatings can be a¬†perfect “foundation” for this product.
However old coatings should be wet-scoured with diluted
HYDROFORCE or TURBOFORCE.
After a deep scrub, wait until all coats are installed before
burnishing. Burnishing before recoat causes adhesion
issues.
Health and Environment
Contains no formaldehyde. Contains no APEOs which may
become environmental hormones. Contains no PFOS based fluorosurfactants.

Reviews

There are no reviews yet.

Be the first to review “ACCELERATOR”